Category Archives: LPPF News

You are here:

Summer Intern(s) Needed

LPP Fusion LOGO

As in many past summers, next summer LPPFusion will be hiring one or two interns for 2017. We invite undergraduate and graduate students in physics, chemistry or any engineering field to apply for these paid, full time summer positions. Interns will be helping out as needed in the lab, but will also work on special…

Collaboration Begins with Krakow Effort for Hydrogen-Boron Fusion

In the same trip to Poland in October, Lerner also visited the Institute of Nuclear Physics of the Polish Academy of Sciences in Krakow. There he discussed with Dr. Marek Scholz and other researchers the Institute’s plans to initiate their own research into hydrogen-boron fusion using a plasma focus device. This is only the second…

Beryllium Anodes Arrive, Cathode Due in February

Right on schedule, Rev Manufacturing delivered from California two new beryllium anodes to LPPFusion at the beginning of September. The anodes are carefully sealed (see Fig.3) and will remain so until we are ready to use them. Beryllium is vulnerable to reactions with humid air, so we will minimize both humidity and the time the…

New Insights Help Plan Next Experiments

LPP Fusion LOGO

In all scientific research, experiments and observations give rise to new theoretical concepts, which in turn lead to the design of more advanced experiments. LPPFusion has gone through such a cycle in the past few months, with new insights revising our plans for the next experiments. In August, the expected availability of beryllium anodes in…

Experiments, Conference Discussions Yield New Understanding of Impurities

The recently-completed set of experiments with LPPFusion’s FF-1 device, combined with discussions with colleagues at the International Center for Dense Magnetized Plasma (ICDMP) conference in Warsaw, have produced a greater understanding of the ways impurities are produced in our device and how to reduce them. LPPFusion’s research team has long identified heavy-metal impurities, produced by…

Safety Procedures, Instrument Design Paves Way for Beryllium Anode

LPP Fusion LOGO

The next step beyond the new experiments with the existing tungsten electrodes is the installation of the beryllium anode, expected to arrive in September. This will be the first time that a beryllium electrode has been used in any plasma focus device, an idea covered by LPPFusion’s patents. While most work is still concentrated on…

Preparations Advance for Next Round of Tungsten Experiments

LPP Fusion LOGO

For the past month, the research team has been preparing for a second and final series of experiments with the two tungsten electrodes, before moving on to the planned combination of tungsten cathode and beryllium anode later in the fall (see next story). In the course of these preparations, we’ve come across a possible route…

FF-1 Shots Put 12 kJ into Pinch Region, Needs 3D Modeling Help to Go Higher

LPP Fusion LOGO

A new analysis of LPPFusion’s experimental results with the FF-1 device shows that fully 20% of the input energy was concentrated into the pinch region, where fusion reactions occur. As much as 12 kJ out of the capacitor bank’s initial 60 kJ was compressed into the pinch. These results, obtained in June with tungsten electrodes…

LPP Fusion Reports Ion Energy Records, Other Progress to International Plasma Symposium

LPP Fusion’s President and Chief Scientist Eric Lerner reported on June 21 new record ion energies of over 260 keV (equivalent to a temperature of over 2.8 billion degrees K) to 150 plasma scientists assembled in Prague, Czech Republic for the 27th International Symposium on Plasma Physics and Technology. The new results, obtained with the…

Fusion Yield Up Almost 50% as FF-1 Resumes Firing

Six weeks after resuming firing, FF-1’s fusion yield reached 0.25 J on May 23, a nearly 50% increase over the highest-yield shot previously achieved with this device. This increase, confirmed by a second shot on May 24, provides the most concrete evidence yet that our continuing effort to reduce impurities in FF-1 increases fusion yield….