Category Archives: LPPF News

You are here:

LPPFusion Reports Highest Plasma Purity at PLASMA 2019 Conference

  At the PLASMA 2019 conference in Opole, Poland July 15-19, LPPFusion Chief Scientist Eric Lerner presented experimental evidence that our fusion device, FF-2B, has met our initial goal of achieving low-impurity plasma. In other presentations at the conference, and in discussions, it emerged that the purity level achieved by FF-2B is well beyond that…

Beryllium Experiments Begin with FF-2B: Impurities Low, Yield Rising

After nearly a year of preparation, on June 4th LPPFusion’s research team started a new series of experiments using for the first time beryllium electrodes in a plasma focus device (Fig.1). Before starting, we renamed our device Focus Fusion 2B or FF-2B for short. The new name stands for Beryllium electrodes and Boron fuel—which we…

How We Prepared the New Experiment

  It took us five months of intensive work to assemble FF-2B with its new beryllium electrodes. The safety requirements of dealing with beryllium to ensure that none of us were exposed to beryllium dust was one safety concern that slowed us down. But in the process, we have succeeded in greatly upgrading our experimental…

LPPFusion’s Lerner to Speak at Fusion Energy Symposium On a Faster Route to Fusion

State House Annex, Trenton, NJ

Contacts: Ivy Karamitsos, (646) 515-8866, ivy@lppfusion.com Eric J. Lerner, (908) 546-7654, eric@lppfusion.com   LPPFusion President and Chief Scientist Eric J. Lerner will present proposals for “A Faster Route to Fusion” at the Fusion Energy Symposium, a hearing sponsored by NJ State Senator Joe Pennachio (R-26), on Thursday, May 23 at the State House Annex in…

Final Stage of Assembly Begins

On January 28, 2019 we began the final stage of assembly of our new beryllium electrodes, transferring the beryllium anode into our nitrogen-filled glove box to protect us from any contact with beryllium dust and to protect the anode from water vapor and oxygen in the air. Inside the glove box, we will connect the…

Looking Back—2018 Highlights

LPP Fusion LOGO

Technical Milestones: Completed experiments with tungsten electrodes Observational confirmation of the destruction of filaments Publication of cosmology results in leading journal—Monthly Notices of the Royal Astronomical Society Non-Technical Milestones: Over $950,000 investments from Wefunder Over $300,000 gift to Focus Fusion Society for aneutronic fusion research EU patent granted Founding of Fusion Industry Association Successful LPPF…

Plans for the New Experiments

Since our new experiments will start soon, we thought this is a good time to summarize for everyone, including those who have only started following us recently, what our plans for the experiments are, what we hope to accomplish and why we think we can get good results. The basic plan is to increase the…

LPPFusion Passes Financial Audit

On December 3, the BKC accounting firm signed off on their financial audit of the 2017 year for LPPFusion (Lawrenceville Plasma Physics, Inc.). They found that our financial statements “present fairly, in all material respects, the financial position of Lawrenceville Plasma Physics Inc. (D/B/A/LPPFusion Inc.)” This was a big deal for us, because this is…

Proton-Boron (p11B) Fuel Arrives

LPP Fusion LOGO

The high-purity proton-boron (p11B) fuel we will be using in our experiments later in 2019 arrived at LPPF’s NJ facility on Dec. 22. The fuel is in the form of the compound decaborane (chemical formula B10H14) with 99.9999% chemical purity. The boron in the fuel is 99.9% boron-11, the isotope that reacts with hydrogen (protons)…

Axial Field Coil, New Switches Assembled

LPPFusion’s research team, working steadily to prepare for the new beryllium electrode experiments, has accomplished two big tasks. First, Research Scientist Dr. Syed Hassan designed and installed the new Axial Field Coil (AFC) in the vacuum chamber. This copper wire coil controls the spin on the plasmoid in our Focus Fusion device. It carries a…