Category Archives: Plasma Focus Device

You are here:

Titanium Lining for Vacuum Chamber

To download this report click here Based on the results of test shots fired in September, LPPFusion’s research team has decided to line the vacuum chamber of the device with titanium or a titanium compound. While we cleaned oxides off the tungsten, these compounds have reappeared due to oxygen in the stainless steel chamber. After…

Tungsten Cathode Completed, En Route to FF-1

cut_cathode

The critical tungsten monolithic cathode, key to LPPFusion’s next set of experiments, has finally been completed and shipped. It arrived at Tungsten Heavy Powder headquarters in San Diego, California on Monday, Feb.23 from their manufacturing facilities in China. It is expected to arrive at LPPFusion’s Middlesex, NJ laboratory around March 2. “For a long time,…

Physics of Plasmas Publishes LPPFusion’s Runaway Electron Theory

runaway pub image

Physics of Plasmas, the leading journal in the field of plasma physics, has published LPPFusion’s new paper on “Runaway electrons as a source of impurity and reduced fusion yield in the dense plasma focus”. The paper, by Chief Scientist Eric J. Lerner and Chief Research Officer Hamid R. Yousefi, was published online October 22, 2014…

Tungsten Anode Goes Into FF-1; Aluminum Cathode Model Is Checked

story2b

October 10, LPPFusion team members Eric Lerner, Hamid Yousefi and Tony Ellis lifted the tungsten anode into place on top of the FF-1 dense plasma focus experimental device (figure 1). The anode had previously been attached to its steel connecting plate (see September report) and was temporarily attached to a metal carrying rod for insertion…

Re-Assembly Begins of FF-1 with Tungsten Electrodes

anodediagram

The new tungsten anode has a current connection with the silvered steel plate at the edge indicated to by the blue arrow.  This current connection is below the red O-ring (yellow arrow) that seals the vacuum chamber indicated by the black arrow.  The old current connection was at the location of the red arrow, inside the vacuum chamber…

Tungsten anode has arrived

anodetungsten

The first of LPP’s new tungsten electrodes, the anode, or inner electrodes, is now complete and has arrived at our Middlesex, NJ lab. The electrode will contribute to greatly reducing the impurities that have prevented high density in our fusion-generating plasmoids. First, it connects to the rest of the circuit outside the vacuum chamber, eliminating…

Digging in the Data—oscillations and x-rays

oscillations

The months that FF-1 is not running have given the LPP research team time to look more deeply at the hundreds of gigabytes of data that the experiments have been generating. One puzzle LPP Electrical Engineer Fred van Roessel looked at was the rapid oscillation in current and voltage that occurs when the machine fires…

LPP and PPRC collaborate on pre-ionization experiments

anode erosion

The FF-1 anode, which is plated with 0.001 inches of silver, shows a ring of erosion near the end of the insulator (which has been removed along with the cathode). On the right side, where deposits have been cleaned away, the copper color shows clearly where a ring of silver has been vaporized and measurements…